The decoration of the children's room is very important. In order to create a healthy and comfortable living environment for the children, the parents can be said to be broken, and even the design of the children's room lighting is not sloppy. So how do children's room lighting design ? The following small series will bring everyone to understand in detail!
First, the lampshade should cover the light bulb
The shade of the children's room room is light and optimal, and the choice is to cover the light bulb, in order to avoid letting the child touch the light bulb. On the one hand, the high heat of the bulb can burn the child; on the other hand, the grease on the finger of the child will allow the dust to adhere to the bulb, reduce the service life of the bulb, and may even cause the bulb to explode, which is not good.
How to design children's room lighting
Second, children's room lighting design
Although the light on the head of the children's bed can give more light to the bed, the child's vision is very fragile and cannot withstand direct sunlight for a long time. Moreover, close-range lamp magnetic radiation has many adverse effects on children's brain development. The way to install it is: make sure the child is lying on the pillow and can't see the lamp.
Third, the wire of the wall lamp must be in the wall
The child's nature is lively, active, and full of curiosity about things around, but their lack of self-protection awareness. Therefore, if a wall lamp is installed in a children's room, then you must pay attention to not letting the power cord be exposed. The children in the province take the wires and play with the toys, which is not a joke.
How to design children's room lighting
Fourth, the socket must have a cover
Children also like to climb everywhere, so we must pay attention to whether the power outlet in the children's room is safe. Ordinary power outlets are not covered. For the safety of children, we have to choose a socket with a safety cover or a socket that can be automatically closed by unplugging the power hole.
Five, install multiple sockets
The children's room is the most self-contained space for children at home. Whether it is learning, playing, or playing with friends, it is mostly done in this free little world. Therefore, the lighting in the room is more than that in the adult room; electrical appliances such as computers, air conditioners, and televisions need to be installed with more sockets during the renovation to avoid overloading the electrical equipment at a single power point because of insufficient sockets.
Children's room lighting
Xiaobian reminder:
Choose an adjustable luminaire for your child. When choosing a luminaire for a child's room, choose a luminaire that adjusts the brightness or angle. We can dim the light at night to help the child fall asleep as soon as possible; after the child falls asleep, remember to turn off the light.
The above is how to design the children's room lighting for you to share with you, I hope to help you. If you want to know more about the luminaire, please continue to pay attention to the net. 10 seconds to get the speed quotes, you can get four sets of design plans for free, and the decoration butler will follow the whole service, and take action!
infrared therapy lights,red led therapy light,led body light therapy
Shenzhen Bonliter Optoelectronic Co., Ltd. , https://www.bonliters.com