[Office Partner Information Center] How do desktop computers wirelessly access the Internet? Compared with laptops, desktops have naturally gained a lot of people's preferences with their absolute advantages. The desktop computer has a large screen, fast response, and long service life. If you just use it at home and don't carry it out, the desktop is the best. Then, for the current mainstream Internet access method - wireless Internet access, many desktop users are certainly not behind.
[desktop wifi] desktop how to wirelessly connect to the desktop computer how to connect wifi
First, the desktop computer uses wireless network card to achieve wireless Internet access
This method must be configured with a PCI slot type network card. The NIC is set up by opening the mainframe of the desktop, then installing the NIC into a free PCI slot, then installing the cradle and then installing the NIC driver. This type of network card has an external receiving antenna, so the signal acceptance and signal stability are good. However, there is also a bad place. For those brand machines that have not been over-protected, some of the mainframes of the brand machines are labeled with laser fragile labels. If the chassis is opened, it is not guaranteed.
Second, how to wirelessly access the desktop
External wireless network cards are now basically USB interfaces. This is very similar to a USB flash drive, but it is much larger than a USB flash drive. With an antenna, it can improve the signal receiving capability. This method of setting up the network card is to insert the network card directly into the USB interface, and then the system will find new hardware, and then we can install the driver.
1. The built-in wireless network card of the PCI interface is also like this. After the boot is installed, it will prompt to discover new hardware after entering the system. Generally, automatic installation is not recommended. We choose the option to install from the list or specified location (advanced), and then if the driver is on the CD, you can use the "search for removable media" item if it has been copied. On the local hard disk, select the following item "Include this location in the search", and then select the path through the "Browse" button. Next, the system will automatically install the driver installation, and click Finish to finish.
2. Double-click the icon of the wireless network in the lower right corner of the system to bring up the wireless network connection. (If the service Wireless Zero Configuration in your system is disabled or turned off, the wireless network connection is not available, you need to go to "Control Panel - Administrative Tools - Services" to find the service, then turn it on and set it to start automatically. Then, in the list of selected wireless networks, find the matching wireless signal and connect.
3, how to find the driver: (1) go to its official website to find the corresponding driver (2) network search network card chip, download the same chip network card driver (3) install driver wizard and other similar driver software
4. How to know if the wireless network card installation is successful: Right click on my computer—management, enter the computer management interface and click the device manager. In the network adapter of the device hardware interface on the right, you can know whether the wireless network card is successfully installed.
How to connect wifi to desktop computer
Step 1: Prepare
Connect the network cable to the physical network card interface of the desktop computer first, and connect the other end of the network cable to any LAN port of the router.
In general, the default IP of the router is 192.168.1.1 or 192.168.0.1, so if your network does not start with 192.168.1, you should manually change the IP manually.
Right-click on "My Network Places" on your computer's desktop and select the "Properties" command from the pop-up menu.
Then right click on the "Local Area Connection" icon and select the "Properties" command.
Select "Internet Protocol Master (TCP/IP)" in the pop-up dialog box and click the "Properties" button.
Then change the IP to 192.168.1 network segment, such as 192.168.1.111, the last step is "OK".
Step 2: Start setting up
Ok, let's set up the wireless network through this desktop computer. Open a browser, type 192.168.1.253 in the address and press Enter. After entering the correct Username and Password, click the OK button.
The "Setup Wizard" pops up automatically and clicks the "Next" button.
Switch to the "Working Mode" step, select the first "AP" option, and click the "Next" button.
Switch to the "Wireless Setup" step, enter the SSID you want to set in the "SSID" below, then select "WPA-PSK/WPA2-PSK" below and enter the password, click the "Next" button to continue.
Then it will switch to the last step, prompting that you need to restart, just click the "Restart" button to restart the router.
Then change the "property" of the wireless connection to the mode of automatically obtaining the IP.
Then turn on the wireless of the computer, search for wireless, there should be this wireless signal and there is an encrypted logo.
The CAS Registry number of Poly(L-lactic acid) PLLA is 33135-50-1. It is white powder. We can provide Intrinsic viscosity from 0.30-2.25 dl/g, Mw from 6000-30000.
For each batch a certificate of analysis is provided, showing the analytical data determined in our quality control laboratory. Additional analytical data can be made upon request.
When stored in the original packaging at low temperatures (2-8°C), PLLA keeps its initial properties for at least two years.
Rimless Industry Co., Ltd. (RIMLESS) is devoted to the global brand operating and integrating, sale and after-sale services of biomedical materials, high-end medical devices, regenerative aesthetic products,cosmetics and beauty tools.
RIMLESS is the exclusive distributor, exporter and global brand licensor of REBORN. We take REBORN and RIMLESS as the core brands, biomedical materials and their applications in the medical field as the main business, and the high-end medical devices as the research and development direction.
We have exported over 50 countries and areas in the world and won a very good reputation and long-term partnership with our customers.
Poly L-Lactic Acid Plla,Biodegradable Polylactic Acid,Polylactic Acid Material,Biodegradable Polylactic Acid Plla
Rimless Industry Co.,Ltd. , https://www.rebornplla.com