[ Chinese wardrobe net ] to make wardrobes , the choice of materials is very important, aesthetics, environmental protection, load-bearing, etc. should be considered, if the selection of materials is not good, it will lead to poor quality of the wardrobe, shortened service life, and may emit toxic gases such as formaldehyde. To endanger the health of the user, what materials are used in the wardrobe? Today, let's take a brief look and provide reference for future purchases or custom wardrobes.
Wardrobe brand has which wardrobe door material wardrobe purchase skills
What are the wardrobe plates?
1, solid wood
When it comes to wardrobe materials, it is naturally the best for solid wood. It avoids excessive use of adhesives, is more healthy and environmentally friendly, has strong bearing capacity, is safe and stable, and has a long service life. It can reach more than 500 ordinary wooden wardrobes. Durable, but the cost of solid wood wardrobes is high, so most of the wardrobes on the market use panels or panels to make wardrobes.
2, large core board
The large core board, also known as the blockboard, is a good material for the wardrobe frame. The large core board is a plywood with a solid wood core. The inner layer is made of a strip of strip-shaped logs, and then the outer layer is made of the outer material. The surface is smooth and flat, the stability is strong, and the deformation is not easy. For the plywood, plywood and plywood, the thicker the price, the more you can choose according to the pressure and strength.
3, high density board
High-density board is a commonly used wood-based board. It is made by shredding and pressing wood, branches, etc. in water. The density is uniform, the strength is high, and the processing is also easy. However, the disadvantage is that the moisture resistance is not good. Kitchens and other wet places should not be used, but it is not bad for making wardrobes.
4, solid wood particle board
Solid wood particle board, from the name point of view, is to make the solid wood into granules, and then pressed with plastic bonding, retaining some of the physical characteristics of solid wood, better nail holding power, lighter texture, will not give the wardrobe Cause too much pressure, but the load capacity is not weak, and the cost is low, cost-effective, so it is often used in the manufacture of wardrobes.
Which kind of custom-made wardrobe plate is good?
Blockboard (large core board): good moisture-proof effect, can not be directly painted, the middle of the blockboard is made of natural wood strips, the two sides are glued with very thin veneer, as the name suggests big core board, is decoration One of the most important materials. It can be used for furniture and wooden doors and door covers, heating covers, curtain boxes, etc. Its waterproof and moisture-proof performance is superior to particleboard and MDF. The woodwork such as furniture made of large core board has to pass through two steps of using adhesive board and painting, and the cost is higher. The large core board is divided into 3, 5, and 9 PCT plates according to the thickness. You can choose according to the pressure and strength to be accepted. The thicker the price, the higher the price.
Glulam: not easy to deform, this is an emerging solid wood material, using high-quality imported large-diameter logs, deep processing and imaging fingers like staggered stitching. Due to different processes, the environmental performance of this board is superior. It is 1/8 of the amount of formaldehyde allowed in the large core board. The price is about 200 yuan per sheet, which is slightly more expensive than the high-grade large core board.
The density board has a poor nail holding power than the particle board. The particle board is a natural material that is crushed into granules and pressed into a board. It is the main material of the cabinet. The MDF is formed by pressing powdered wood chips, and the flatness is good, but the moisture resistance is poor. In contrast, the nail holding force of the MDF is worse than that of the particle board. If the screw is loose after the screw is tightened, it is difficult to fix because the strength of the MDF is not high, so it is rarely used for the cabinet.
Light therapy is suitable for depression prevention programs to play a huge role in the treatment of depression. When we start a beautiful day by bathing in the warm morning light every morning, full of energy in work and study, and full of hope for the future, as long as we have a well-made light therapy lamp, you can easily achieve this goal.
Light Therapy Lamp Best,light Therapy Lamp for Depression,Light Therapy Lamp
Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com